Speed Camera Warnings Built for Truck Drivers, Not Car Drivers
Truck Me alerts you to fixed cameras, mobile camera zones, and average speed zones across Australia's freight corridors. Speed limits are applied to your vehicle class so the limit on screen is the one that applies to your truck.
How speed enforcement differs for heavy vehicles
Speed enforcement for heavy vehicles operates on different rules to passenger cars in Australia. On most open roads, the maximum speed for a heavy vehicle is 100 km/h, regardless of whether the car limit is 100 km/h or 110 km/h. On the NSW Pacific Highway and sections of the Bruce Highway in QLD, cars travel at 110 km/h while trucks are capped at 100 km/h. A driver following a consumer GPS app that shows the car limit will not receive an alert until they are already breaking the truck limit.
Heavy vehicle enforcement is also carried out by the National Heavy Vehicle Regulator and state police using mobile enforcement units. These are not always publicised and move frequently. The combination of lower legal speed limits and targeted enforcement means truck drivers face a different risk profile to car drivers, and need alerts calibrated to that profile.
Truck Me reads your vehicle class from your profile and applies the correct speed limit on every road segment. If the car limit is 110 km/h and your truck limit is 100 km/h, the speed limit shown in the app is 100 km/h and the alert fires at the truck threshold, not the car one.
Major fixed camera corridors for truck drivers
Fixed speed cameras are concentrated on high-volume freight routes. These are some of the corridors where camera coverage is most significant for heavy vehicle operators.
NSW: M4 and M7 motorways
The M4 and M7 are major freight routes into and through western Sydney. Both have fixed speed cameras at multiple points and variable speed limits enforced by overhead gantries. Heavy vehicle speed limits apply across these motorways and can differ from the posted variable limit for cars during some conditions.
QLD: Bruce Highway
The Bruce Highway from Brisbane to Cairns is the primary freight corridor for north Queensland. Average speed camera systems operate on sections of the highway. The 100 km/h truck limit applies throughout, with fixed and mobile cameras present across the length of the highway.
VIC and NSW: Hume Highway
The Hume Highway between Melbourne and Sydney carries some of the highest freight volumes in Australia. Average speed camera systems operate on NSW sections of the highway. Combined with fixed cameras on approaches to major towns, the Hume is one of the most heavily monitored corridors for heavy vehicles in the country.
How Truck Me's speed camera alert system works
Fixed speed camera alerts fire as you approach the camera location along your route. The alert distance is calibrated to give you enough time to check your speed and adjust before you reach the camera. The alert includes an audio chime and a visual indicator showing the camera type and your current speed against the applicable limit.
Average speed zone alerts work differently. When you enter an average speed zone, Truck Me shows a persistent on-screen indicator for the duration of the zone. The zone start and end points are marked on the map. An audio alert fires on entry and, optionally, a reminder fires at intervals through the zone.
Mobile camera alerts are sourced from community reports and updated enforcement data. When a mobile camera has been reported in an area, Truck Me shows a zone alert rather than a fixed point, reflecting the fact that mobile cameras operate within a stretch of road rather than at a precise location.
Speed camera alert features
Every camera alert feature is calibrated to the heavy vehicle context, not copied from a consumer app.
Fixed camera alerts
Advance warning before fixed speed cameras on major freight corridors including the Bruce Highway, Hume Highway, and M4/M7 in NSW. Audio alert fires well before the camera, not when you are already passing it.
Mobile camera alerts
Mobile camera locations are updated regularly from community data and enforcement schedules. Truck Me flags mobile camera zones as you approach so you have time to check your speed before entering the zone.
Average speed zone warnings
Point-to-point average speed cameras calculate your speed across a distance, not at a single moment. Truck Me warns you when you enter an average speed zone and keeps a reminder on screen until you exit.
Heavy vehicle speed limits
Some roads have lower posted limits for heavy vehicles than for cars. Truck Me applies your vehicle class to speed limit lookups so the limit shown on screen is the correct one for your truck, not the car limit.
Speed limit alerts separate from camera alerts
Camera alerts and speed limit alerts are separate categories with independent volume controls. You can run speed limit alerts continuously while keeping camera alerts as a one-off chime.
Camera locations on map
Fixed speed cameras are visible on the map as a layer. Browse your planned route before departure to identify camera locations and average speed zones before you are moving.
Frequently Asked Questions
What is the speed limit for trucks on Australian highways?
The default speed limit for heavy vehicles on open roads in most Australian states is 100 km/h, even where the car limit is 110 km/h. This applies to articulated trucks and vehicle combinations over a certain gross mass. Some roads in WA and NT have higher limits for cars but retain 100 km/h for heavy vehicles. State-specific rules apply on some roads, and Truck Me applies your vehicle class to show the correct limit.
How do average speed cameras work for trucks?
Average speed cameras, also called point-to-point cameras, record your vehicle at two fixed points and calculate your average speed across the distance. If that average exceeds the speed limit, an infringement is issued. For heavy vehicles, the relevant limit is the truck speed limit, not the car limit. NSW has extensive average speed camera networks on freight corridors including parts of the Pacific Highway, Hunter Expressway, and Hume Highway. QLD operates average speed cameras on sections of the Bruce Highway.
Are the speed camera locations in Truck Me accurate?
Fixed camera locations are sourced from official data and updated regularly. Mobile camera locations are crowd-sourced, so accuracy depends on recent driver reports in that area. Truck Me labels fixed cameras and mobile camera zones differently so you can tell which category an alert comes from. As with any camera warning system, Truck Me is a driving aid, not a substitute for monitoring your speed.
Do consumer speed camera apps work for truck drivers?
Consumer apps like Waze show speed camera alerts but use the car speed limit, not the heavy vehicle limit. On a road where cars can do 110 km/h and trucks are limited to 100 km/h, a consumer app may not alert until you exceed 110 km/h, which is already 10 km/h over your legal limit. Truck Me applies your vehicle class to every speed limit lookup.
Does Truck Me show school zone speed limits?
Yes. School zone speed limits are applied during active school zone hours. Truck Me shows the current applicable speed limit for your vehicle class, which updates when you enter a time-restricted zone.
Can I turn off speed camera alerts?
Yes. Camera alerts and speed limit alerts are separate categories in Truck Me's audio controls. Each can be muted, volume-adjusted, or set to vibrate-only independently. You can also set a speed threshold above which the speed limit alert fires, rather than having it active at all times.
Related guides
All Features
Full overview of Truck Me: NHVR routing, bridge warnings, incident reports, offline maps, and logbook.
Bridge Clearance Warnings
Two-stage bridge height warnings: before you turn and again at 500m approach. Not after the bridge.
Truck Driver App Australia
Everything in one app: routing, cameras, bridge warnings, incidents, logbook, and offline maps.
Ready to try Truck Me?
Join the waitlist for early access. Free tier available at launch.